Viewtech Universal Short Throw Projector Wall Mount Fully Adjustable: 22 -52

The Viewtech Universal Short Throw Projector Wall Mount is a great product that is very versatile for different projectors. It is by far the best mount and is very adjustable to fit different projectors. The only downside is that it is a bit heavy and durty, but it is worth the money.

Viewtech’s universal short throw projector wall mount is fully adjustable to projectors weighing up to 50 lbs. Its low-profile design is perfect for installations where the projector needs to be close to the wall. The mount also features a built-in bubble level for easy installation.

Viewtech Universal Short Throw Projector Wall Mount Fully Adjustable: 22 -  -
Viewtech Universal Short Throw Projector Wall Mount Fully Adjustable: 22,-52,
View on Amazon

Features – Viewtech Universal Short Throw Projector Wall Mount Fully Adjustable: 22

  • Fully adjustable to fit most short throw projectors
  • Durable steel construction
  • Simple installation
  • Includes all necessary hardware

Viewtech Universal Short Throw Projector Wall Mount Fully Adjustable: 22,-52, is a projector mount that is fully adjustable to fit most short throw projectors. It is made of heavy duty steel and aluminum for durability and has a built in bubble level for easy installation. The mount is also powder coated for a clean, professional look.

Pros

  • Durable being made of pretty good steel.
  • Nice design
  • Great extension length.
  • Very versatile for different projectors
  • Only for in line projector mounting
  • Easy to install
  • Easy to install and adjust
  • Solid and well built
  • Flexible

The Viewtech Universal Short Throw Projector Wall Mount is a very versatile and easy to install mount that is perfect for different projectors. It is made of solid steel and is adjustable to 22 inches, making it perfect for different projection needs. Additionally, its design is perfect for in line projector mounting and its extension length is great for different environments.

Cons

  • Not as versatile
  • May be more expensive

The Viewtech Universal Short Throw Projector Wall Mount Fully Adjustable is a bit more expensive than some of the other projector mounts on the market. However, it is also a bit more versatile. This mount can be used with short throw projectors, making it a great option for those who want to mount their projector close to the wall. Additionally, the fully adjustable design allows you to position the projector exactly where you want it, making it a great choice for those who want to get the perfect projection.

This mount is very versatile for different projectors and is easy to install. It is also flexible and has a nice design. It is made of pretty good steel and is solid and well built. The only downside is that it may be more expensive than other mounts. >>> Check Price <<<

Conclusion – Viewtech Universal Short Throw Projector Wall Mount Fully Adjustable: 22

The Viewtech Universal Short Throw Projector Wall Mount Fully Adjustable is an excellent product that is well worth the price. It is easy to install and use, and it provides a great deal of adjustability to ensure that you can get the perfect projection angle for your needs. The mount is also very sturdy, meaning that your projector will be secure and safe when mounted on the wall. Overall, the Viewtech Universal Short Throw Projector Wall Mount Fully Adjustable is a great choice for anyone in need of a quality projector mount.

Related Images

 Viewtech Universal Short Throw Projector Wall Mount Fully Adjustable: 22

The Viewtech Universal Short Throw Projector Wall Mount is fully adjustable and perfect for any short throw projector. It features a robust steel construction and easy installation. With its universal design, it is compatible with most short throw projectors on the market.


 Viewtech Universal Short Throw Projector Wall Mount Fully Adjustable: 22

The Viewtech wall mount is a versatile and adjustable mount for projectors. It is fully adjustable to allow for different angles and distances, and can be used with short throw projectors. The mount is made of sturdy materials and is easy to install.


Vertical Shift:8O0mm Ax79 51315 Specification @Fully extended : 52
+/- 80mm (V)
+/- 42mm (H)
+/- 10 degrees (Pitch),
+/- 5 degrees (Roll),
+5 degrees (Yaw)

This mount is fully adjustable to provide the perfect projection every time. It can be shifted vertically by up to 80mm and horizontally by up to 42mm, as well as adjusted for pitch, roll, and yaw. It also has a weight capacity of 22lbs, making it perfect for most short throw projectors.


Universal mounting plate ider mounting arms 12.5
– 46cm (8.6 – 18in), Weight: 1 – 5kg (2.2 – 11lbs), Silver


Wall Mounting Plate 16inch(407mm) the wall plate allows 3-inch vertical height adjustment  Viewtech Universal Short Throw Projector Wall Mount Fully Adjustable: 22
-55 Tilt, Swivel, Rotation 360, Extendable Arm Length 18.69 to 35.02 inch
(476mm-889mm), with Wrench
The Viewtech Wall Mounting Plate is a fully adjustable wall mount for short throw projectors. It features 22-55 tilt, swivel, rotation 360, and extendable arm length 18.69 to 35.02 inches (476mm-889mm). The wall plate also allows 3-inch vertical height adjustment.


How To Work With Your Projector Short throw projector(Not Included) Attached to the wall tener : —s = en throw projector(Not Included) Attached to the wall (mounted backwards)  Viewtech Universal Short Throw Projector Wall Mount Fully Adjustable: 22
This projector mount is similar to what you would see in a boardroom or professional setting. It is a very sleek design with a black powder coating. The mount is fully adjustable so you can customize your viewing experience. The mount also has a quick release so you can easily remove the projector for transport or maintenance.


Fixing Kit Connecting Screw M4 Anchor bolt M6x55 Spacer(10.7) L5 Allen key z / $ $ Screw M4x8 Screw M6x15 Nut M5 L3 Allen key aA M5x25 wel, M5x30  Viewtech Universal Short Throw Projector Wall Mount Fully Adjustable: 22
Screw M4x70
economy projector bracket is ideal for projectors weighing up to 25kg. It has a short throw distance which is good for smaller
rooms or where space is limited. It is also fully adjustable so you can get your image just right.


Related Videos

Viewtech Universal Ultra Short Throw Projector Wall Mount Fully Adjustable: 16

This mount is fully adjustable to fit most Ultra Short Throw projectors with a maximum distance between mounting holes on the back of the projector of 12.5 inches. The mount offers adjustments in three directions: three vertical image adjustment, 1.7 lateral image adjustment, 16 extension length, and 16-32 image size adjustment. It also has three fine tune adjustment knobs for Roll, Pitch, and Yah, making the alignment of the image into a rectangle extremely easy, quick, and accurate. The Hollow, compact telescopic arms allow for easy heading of cables, ensuring a clean and simple look after installation. This mount is also certified weight capacity up to 33 lbs, making it durable and heavy-duty.

The problem with Short Throw Laser Projectors (WeMax)

In theory, short throw laser projectors should be able to project a large image from a short distance away from the wall. However, there are several issues that make them difficult to use in practice. Firstly, the projectors need to be very close to the ground in order to achieve a large screen size, which makes it difficult to find furniture that works with them. Secondly, the surface of the wall needs to be very smooth in order for the image to be clear, which is often not the case. Thirdly, the screen size is often not as large as advertised, due to the way that screen size is measured. Finally, the projector may cast a shadow if the furniture is not arranged correctly. Overall, short throw laser projectors are difficult to set up and may not work well in all settings.

How to Build and Hang a Projector Screen

Today we’re going to make magic together in the form of a 144 inch projector screen. It’s the screen that we’ve always dreamed of, but we never had the guts to make. Well, today’s the day! The mainframe is 124 and a half inches by 76 and 5/8 of an inch. I’ll be using the Kreg jig to join my boards together. I set my jig to three-quarter inch material and two pocket holes on each joint. It should do the trick!

If you don’t have the Kreg jig, you can get the baby Kreg jig. It’s only $20 and you get the same results with just a little bit extra effort. Line the end of the baby Kreg jig up with the end of your board, clamp it down, and that’s it! Prop the joints up using some of your off cuts and this will help square up our joints. I’m using a right angle clamp to hold the joint together while I’m first screwing. It’s not necessary, it just makes things easier.

Make your way around the remainder of the frame using an inch and a quarter pocket screws and clamps. Next up is the center supports and I set them 39 inches off of each inside edge. I use my combination square to square up the joint and then attach it using an inch and quarter pocket screws on each end.

Next I’m going to center it on my wall and figure out where I’m going to put the cleat. The cleat will be made out of one piece of one by four cut at a 45 degree angle. One of those sides will go into the wall, the other side will go into the back of the frame, but first I need to determine where I’m going to put my cleat. And as you can see, I have an access panel on the wall that I need to dodge.

Setting my table saw to 45 degrees, and I’m making my cut right along the center of the one leg. Now because of that access panel, I need to prop my cleat up to one by fours and plus one piece of plywood. I think that will do the trick.

Now I have to start quantifying everything using my level. Once I centered my frame on the wall, I determined where I needed to be to fall back the frame. Now it’s crucial that your cleat is square, so double check your measurements and use a combination or speed square to make sure it’s square.

Use your indoor house vacuum to vacuum up the wood shavings (don’t tell Rachel), and throw on some wood glue and attach the cleat to the frame. I don’t always use wood glue over top of carpet, and I did today. I’m using a countersink bit which basically just means a bit that’s larger than the head of the screw. This way the head of the school sits slightly below the surface of the cleat.

Creepy locate where the studs are, and we’re going to transfer that to our cleat. I’m using this Forstner bit to countersink it and a slightly smaller drill bit to pre-drill my holes. Set your drill to drill mode, insert your slightly smaller bit, and pre-drill as far as you can through the cleat into the wall. Remove your drill bit and insert your ratchet, kick it into low gear, and get the bolt started in your cleat. And drive it into the stud. Repeat the process on the other side, while checking for level.

The beauty of this cleat is that I can slide it into position as needed, so here I’m about a quarter of an inch to a half of an inch off. That’s no big deal, it’s still going to hold it, and it’s still really strong. I’m going to add some L-brackets to each of the joints just for some added stability.

Once putting my frame up on the cleat, I realized that my wall is not actually flat or straight, so I need some spacers. So I’ll use 2 by 4’s, a 1 by 4, and some 5 millimeter rule on and made a couple spacers. It’s not pretty, but it will get the job done. And on the far end, I had to use a little mini cleat spacer to pull the frame into the wall.

That was going to be such a cool shot. Totally blew it.

I’ll be using Carl’s flexi white 1.1 gain 16:9 86″ by 153″ 175 inch roll of the projector screen material. The process for stretching this material is very similar to that of stretching a canvas. Start on one end, secure the staples, and then go to the opposite side. Pull it tight

Projector Mount ,Extendable Projector Ceiling Mount 11.8

“,”,

How to install a Projector on the Ceiling – With mount hidden wires – Easy DIY by Warren Nash

Viewtech Universal Ultra Short Throw Projector Wall Mount Fully Adjustable: 16"-32"


Viewtech Universal Ultra Short Throw Projector Wall Mount Fully Adjustable: 16"-32"

$117.00 @ Amazon.com

Product Details
Brand: Viewtech
Model #: Ultra short throw projector wall mount
Color: White
Dimensions: 19.5 X 8 X 10.4 Inches (Length X Width X Height)
Price: $117.00

Viewtech Universal Short Throw Projector Wall Mount Fully Adjustable: 22"-52"


Viewtech Universal Short Throw Projector Wall Mount Fully Adjustable: 22"-52"

$125.00 @ Amazon.com

Product Details
Brand: Viewtech
Model #: 8541617961
Color: White
Dimensions: 24 X 8 X 10.4 Inches (Length X Width X Height)
Price: $125.00

Mount-It! Projector Wall Mount for Short Throw and Standard Projectors, Universal Projector Bracket Fits Epson Optoma Benq Viewsonic Projectors, 9 in. to 29.5 in. from Wall, 35 Lb Capacity (MI-608)


Mount-It! Projector Wall Mount for Short Throw and Standard Projectors, Universal Projector Bracket Fits Epson Optoma Benq Viewsonic Projectors, 9 in. to 29.5 in. from Wall, 35 Lb Capacity (MI-608)

$62.99 @ Amazon.com

Product Details
Brand: Mount-It!
Model #: MI-608
Dimensions: 32.6 X 8.8 X 4 Inches (Length X Width X Height)
Price: $62.99

viewtech universal short throw projector wall mount fully

Projector Ceiling/Wall Mount White, Homcine Low Profile Universal Projector Holder/Bracket/Hanger Kit with Extendable Arm, Adjustable Height Pole Mount Drop Ceiling Quick Release For Epson Optoma Benq


Projector Ceiling/Wall Mount White, Homcine Low Profile Universal Projector Holder/Bracket/Hanger Kit with Extendable Arm, Adjustable Height Pole Mount Drop Ceiling Quick Release For Epson Optoma Benq

$23.99 @ Amazon.com

Product Details
Brand: Homcine
Color: White
Dimensions: 12.13 X 4.4 X 2.16 Inches (Length X Width X Height)
Price: $23.99

StarTech.com Universal Projector Wall Mount - Projector Mount supports Short & Ultra Short Throw Projectors up to 33lb (15kg) - Tilt/Swivel/Rotate - Adjustable 16.5" to 27.7" from Wall (PROJWALLMNT)


StarTech.com Universal Projector Wall Mount - Projector Mount supports Short & Ultra Short Throw Projectors up to 33lb (15kg) - Tilt/Swivel/Rotate - Adjustable 16.5" to 27.7" from Wall (PROJWALLMNT)

$127.95 @ Amazon.com

Product Details
Brand: StarTech
Model #: PROJWALLMNT
Warranty: 2 Year
Size: 7.7" x 7.1" x 28.9"
Color: Black & Silver
Dimensions: 28.9 X 7.1 X 7.7 Inches (Length X Width X Height)
Price: $127.95

Mount-It! Wall or Ceiling Projector Mount with Universal LCD/DLP Mounting for Epson, Optoma, Benq, ViewSonic Projectors, 44lb Load Capacity, Black


Mount-It! Wall or Ceiling Projector Mount with Universal LCD/DLP Mounting for Epson, Optoma, Benq, ViewSonic Projectors, 44lb Load Capacity, Black

$34.99 @ Amazon.com

Product Details
Brand: Mount-It!
Model #: MI-604
Size: Long
Color: Black
Dimensions: 12.6 X 9.9 X 2.5 Inches (Length X Width X Height)
Price: $34.99

viewtech universal short throw projector wall mount fully

Epson Wall Mount for Projector V12HA06A05


Epson Wall Mount for Projector V12HA06A05

$135.35 @ Amazon.com

Product Details
Brand: Epson
Model #: V12HA06A05
Warranty: Limited Warranty
Dimensions: 23 X 15 X 12 Inches (Length X Width X Height)
Price: $135.35

NC Projector Wall Mount with Universal mounting ,Telescopic Bracket Hanger,33lbs Load Capacity,High-Precision Adjustable: (12.8’’-29.13’’),white,(TYYZJ02)


NC Projector Wall Mount with Universal mounting ,Telescopic Bracket Hanger,33lbs Load Capacity,High-Precision Adjustable: (12.8’’-29.13’’),white,(TYYZJ02)

$99.99 @ Amazon.com

Product Details
Brand: N\C
Model #: TYYZJ02
Size: 12.8’’-29.13’’
Color: white
Dimensions: 30 X 17 X 8 Inches (Length X Width X Height)
Price: $99.99

WALI Projector Ceiling Mount, Universal Low Profile Projector Mount with Retractable Arms and Multiple Adjustment Function (PM-002-W), White


WALI Projector Ceiling Mount, Universal Low Profile Projector Mount with Retractable Arms and Multiple Adjustment Function (PM-002-W), White

$18.99 @ Amazon.com

Product Details
Brand: WALI
Model #: PM-002-WHT
Warranty: 10 Years
Size: 2 - 12.5 inch Bracket
Color: White
Dimensions: 8.38 X 5.03 X 3.85 Inches (Length X Width X Height)
Price: $18.99

suptek Universal Projector Screen Wall Mount L-Brackets Wall Hanging Mount 6 inch Adjustable Extension Mounting Hooks for Projection Screen up to 66 lbs, 30 kg Capacity Each, PRL001, White (1 Pair)


suptek Universal Projector Screen Wall Mount L-Brackets Wall Hanging Mount 6 inch Adjustable Extension Mounting Hooks for Projection Screen up to 66 lbs, 30 kg Capacity Each, PRL001, White (1 Pair)

$11.99 @ Amazon.com (Save 20%)

Product Details
Brand: suptek
Color: Projector Screen Mount
Price: $11.99 (Save 20%)

viewtech universal short throw projector wall mount fully

Leave a Comment

Your email address will not be published. Required fields are marked *