Watching movies in your backyard is not impossible to do. You will give you
sense of watching drive-in movies. If you want to do this in your backyard,
you should make a stand to hold the home theater projector on which you
will play the movies. To make it true, you will need some hardware supplies
and following easy steps to create a projector stands. The followings are
the steps that you should follow when you want to make a projector stand by
The first thing that you should do is to prepare your work area. You should
put newspaper on your work surface so that you will be able to clean the
work area easily. Then, you can go to your projector to measure the front
projector base dimensions that you will use for the stand. You can write
the dimensions on a piece of paper.
The second thing that you should do is to put a particle board on the
newspaper that you have prepared before. Then, you should draw a rectangle
from the dimensions that you have got. But, you should draw the rectangle 5
inches longer and wider than the real measurements using a pencil. After
that, you should cut the rectangle by using a hacksaw.
The third thing that you should do is to turn the particle board that you
have cut over. Then, you should apply white glue to the edge of particle
board before covering it with velvet. Wait three hours to allow the glue is
totally dried. Then you should make it neat by cutting off the excess of
velvet that you use from the sides of particle board. You can do it by
using a razor blade. Then, turn it over.
Next, you should make a hole in the center of the board. You can use the
flat-edged screwdriver to do it. You can do it by smoothing out the hole by
making a rotation with the tip of the screwdriver. After the hole is
perfectly made, you should apply white glue inside it. Place the insert nut
into the hole. But, you have to make sure that the threaded side is facing
up and hammer it. Allow the glue dry.
The fifth thing that you should do is to open the tripod’s legs and set it
up. Find the place where you will place the projector. Then, you should
find the screw at the top of the tripod and screw it into the insert nut in
the particle board. After that, you can put your projector on the stand.
There are options of projector that you can choose. In t his case, you
might want one of Toshiba projector lamps
[http://lcdprojectorlamp.org/toshiba-projector-lamps/]. For more
information about projector lamps, you can visit
From AliExpressAliExpress.com Product - AUN Smart Projector, D5S, Android 7.1 (Optional 2G+32G) WIFI, Bluetooth, HDMI, Home Theater Mini Projector (Optional D5 White)
AliExpress.com Product - VIVICINE 1280x720p HD LED Projector,Android 7.1.2 HD Portable HDMI USB PC 1080p Home Theater Proyector Bluetooth WIFI Beamer
AliExpress.com Product - New listing native 1280*800 smart game movie Video HDMI USB VGA TV Full HD 1080P Home Theater Android OS wifi 3D LED Projetor
AliExpress.com Product - 2016 New CT80 Portable Digital Mini 1800lumen LED LCD Projector HD 1080P Home Theater support USB SD VGA ATV HDMI black or white